wearban MOTOR permanent sliding coating for small 4-stroke engines
For a long motor life of mopeds, mowers and the like
The benefits of wearban MOTOR 4T permanent sliding coating:
- less friction = less consumption less fuel consumption • less carbon dioxide emission • less oil consumption
- less wear and tear less corrosion • less service neccessary • longer motor life • higher trade-in value
- Better motor performance*
- lower oil temperature
- makes starting more effortless
* depending on type of motor, age and condition
This makes the wearban coating so special:
wearban MOTOR 4T lines the friction surfaces with PTFE, the lowest-friction of all substances on the Earth. The surfaces glide against each other “like wet ice on wet ice” (Guinness Book of Records)
Added during the oil change, wearban MOTOR 4T circulates with the oil. The special formulation reaches all friction surfaces in the engine and covers them in a coating with the thickness of approx 1 micron . So, there is no metal on metal friction but PTFE glides smoothly on PTFE, reducing the friction.
wearban MOTOR 4T matches with any oil on the market (except from plant oils)
Suitable protection for your engine:
wearban MOTOR 4T is suitable for all types of small 4-stroke engines In our shop you will find the following bottling volume:
• for engines with up to 1.0 l of motor oil
If your motor requires more than 1.0 l, please contact us for an individual fill.
Application:
1. Before application change oil and filter, if present
2. Mix content by kneading the bag for a little bit.
3. Add to cold engine: Either mix with motor oil in advance or fill wearban MOTOR 4T into the filler of your motor first and then fill up the motor oil.
4. Start the engine We recommend the treatment with every oil change. ATTENTION: During the treatment with wearban MOTOR 4T avoid motor oils containing graphite and MoS2. After the treatment with wearban MOTOR that kind of additives are no longer neccessary.
Caution / Safety note
Harmful to aquatic organisms, may cause long-term adverse effects Wear protective gloves/protective clothing/eye protection/face protection Danger. Causes serious eye damage. In case of contact with eyes, rinse carefully with water for several minutes. Remove contact lenses, if present and easy to do. Continue to rinse. Immediately call a Poison Center or doctor/physician. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid release into the environment.
Wearban can not accept any liability for the correctness or completeness and can not be held responsible for damages of material or immaterial nature caused by the usage or non-usage of the information offered or the usage of incorrect or incomplete information. Users have to judge the applicability of the information and the products for their purpose for themselves. They must not suggest suitability based on contained or omitted information. All liability is excluded for damage based on wrong assumptions regarding the information or the usage thereof (including liability on the basis of negligence or cases in which the company Wearban was aware of potentially occurring damages.)
Dispose of the content/container by reason of local/national provision UFI: