wearban HYDRAULICS permanent sliding coating
Permanent sliding coating for all types of hydraulic systems
The benefits of the wearban HYDRAULICS coating:
- less oil and energy consumption
- less friction, less wear = less service needed
- less stick-slip
- less leakage
- lower level of noise
- lower oil temperature and longer service life
- less CO2 exhaust
- better performance
This makes the wearban coating so special:
wearban HYDRAULICS lines the friction surfaces with PTFE, the lowest-friction of all substances on the Earth. The surfaces glide against each other “like wet ice on wet ice” (Guinness Book of Records)
More details about the priciple of operation:Added during the hydraulic oil change, wearban HYDRAULICS circulates with the oil. Thereby it reaches all friction surfaces and builds up a 1 micron thick lining. So, there is no metal on metal friction any more, but PTFE glides smoothly on PTFE.
Suitable protection for your hydraulic system:
• for up to 5.0 l of hydraulic oil • for up to 10.,0 l of hydraulic oil • for up to 20.0 l of hydraulic oil
If your hydraulic system requires more than 20.0 l, please contact us for an individual fill.
Application:
- Before application, drain oil and change filter if existent.
2. Shake or stir wearban HYDRAULICS well before use.
3. In an extra container, mix wearban HYDRAULICS with your hydraulic oil in a 1:3 ratio.
4. Add this mixture to the hydraulic system slowly to avoid clogging in the filter.
Caution / Safety note
Harmful to aquatic organisms, may cause long-term adverse effects. Wear protective gloves/protective clothing/eye protection/face protection. Hazardous for the environment. Keep out of reach of children.
In case of contact with eyes, rinse carefully with water for several minutes. Remove contact lenses, if present and easy to do. Continue to rinse. Immediately call a Poison Center or doctor/physician. If medical advice is needed, have product container or label at hand.
Avoid release into the environment. Wearban can not accept any liability for the correctness or completeness and can not be held responsible for damages of material or immaterial nature caused by the usage or non-usage of the information offered or the usage of incorrect or incomplete information. Users have to judge the applicability of the information and the products for their purpose for themselves. They must not suggest suitability based on contained or omitted information. All liability is excluded for damage based on wrong assumptions regarding the information or the usage thereof (including liability on the basis of negligence or cases in which the company Wearban was aware of potentially occurring damages.)
UFI:
Caution / Safety note