Fully synthetic chain spray for chain and rope care
- Excellent adhesion on all surfaces
- no dripping losses
- gentle and protective on materials
- gentle and protective on materials
- temperature-resistant from -15 °C to +250 °C
- Ensures long-lasting lubrication.
For lubricating chain bearings, chain drives, toothed belts, wire ropes, machines, open gears, ball joints, and much more. Also suitable for high-speed chains and rope constructions.
Application:
Shake can well before use.
Apply evenly and allow to take effect. Repeat application if necessary.
Switch off machines before use!
Perform preliminary tests for effectiveness and material compatibility.
Caution / Safety note
Extremely flammable aerosol. Pressurized container: may burst if heated. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Use only outdoors or in well-ventilated areas. Protect from sunlight. Do not expose to temperatures exceeding 50 °C / 122 °F. Formation of explosive or highly flammable mixtures may occur in case of insufficient ventilation and/or improper use.
Wearban can not accept any liability for the correctness or completeness and can not be held responsible for damages of material or immaterial nature caused by the usage or non-usage of the information offered or the usage of incorrect or incomplete information. Users have to judge the applicability of the information and the products for their purpose for themselves. They must not suggest suitability based on contained or omitted information. All liability is excluded for damage based on wrong assumptions regarding the information or the usage thereof (including liability on the basis of negligence or cases in which the company Wearban was aware of potentially occurring damages.)
Dispose of the content/container by reason of local/national provision.
UFI:
safety data